Enable and Configure Topcoat

The Topcoat layer prints additional layers of protective material on top of the credential. The additional layers increase the durability of the credential. It also increases the amount of topcoat material used during printing. Instant ID as a Service includes options to add up to four layers of topcoat on each side of the credential.

Preparation Notes:

  • Refer to the specifications of the printer to ensure that it supports printing topcoat layers according to the setting on the credential design.
  • Plan on how much topcoat to apply to the credentials taking into account the amount of topcoat material used and the required durability of the credentials.

Steps:

  1. Create a new credential design or open an existing credential design.
  2. Enable the Topcoat/RTM layer.
    1. Click Expand Expand Layer to expand the Layers pane.
    2. Select the check box next to Topcoat/RTM to enable the layer.
  3. Select the number of layers of topcoat to apply on the credential.
    • Select Single to apply one layers of topcoat on the credential.
    • Select Double to apply two layers of topcoat on the credential.
  4. With the Layers pane expanded, click Expand Expand Layer to open the properties for the Topcoat layer.
  5. Add a Rectangle field to block topcoat from printing on that area. For more information on the Rectangle field, refer to Rectangle Properties.
  6. Click Save Save.
  7. To update the enrollment based on the changes made, click Generate Enrollment Generate an Enrollment. Instant ID as a Service updates the enrollment design with the new fields on the credential design.