Static Graphic Properties

The Static Graphic places an image on the credential design. Follow these steps to configure the properties for Static Graphics.

Note: 32-bit CMKY color graphics are not supported. Static Graphics must be RGB or monochrome.
Note: Uploaded Static Graphic file sizes are limited to 3 MB.

  1. Enter a name for the field in the Name field.
  2. Click Upload Upload then select an image to upload.
  3. Modify the values in the Width and Height fields to adjust the size of the field on the credential design.
  4. Modify the values in the Left and Top fields to adjust the position of the field on the credential design.
  5. Enter a percentage in the Rotation field to rotate the field on the credential design.

  6. Select Display the graphic as semi-opaque then set the Percent Opaque to set the opacity of the graphic.

  7. Click Save Save.